Payment & Shipping Terms:
|Name:||6 Point Tungsten Carbide Tipped Cutters Flails||Size:||O.D. 47 X I.D. 15.5 Mm X Width 6mm|
|Tip Size:||Original Carbide 4*8.5mm||Fits For:||Concrete Floor Planers Scarifier|
|Compatible Brand:||Edco CPM-8 CPM-10 Concrete Scarifier||Working Life:||About 10000 Sqm|
|Packing:||500pcs Each Box||Net Weight:||0.048 Kg/pcs|
Concrete Floor Planer Scarifier Parts,
Edco CPM-8 Scarifier Parts,
Concrete Floor Planer Tipped Cutter Flails
Edco CPM-8 CPM-10 Concrete Floor Planers Scarifier Parts CP206T 6 Points Tungsten carbide tipped cutters flails
We offer durable accessories and spare parts for concrete scarifiers, concrete scarifying machines,concrete planers machines, concrete milling machines, floor grinders, floor scabblers, ranging from replacement TCT tungsten carbide cutters/flails,milling cutters,scabbler bits, full steel star and beam cutters and other ODM accessories. They are perfectly compatible with brands EDCO Multi-plane,Bartell BEF planers, Blastrac scarifiers,SASE,HTC,Trelawny TFP planers, Airtec scarifiers,Kindex,Scanmaskin and other scarifiers and floor planers.
If you can provide below information, we can assist quickly for the right accessries:
- the brand and model of your concrete scarifiers/ floor planers equipment
- the drum shaft diameter
- the cutter outer diameter/ inner hole diameter
Edco Scarifier Cutters for CPM-4, CPM-8 & 8 Shaft CPM-10
All cutters are sold individually
Come in tungsten carbide and hardened steel cutters(pointed and flat tip steel)
Use with Edco Scarifiers and Crete-Planers
These cutters ride on a shaft within the drum to dig into the surface
Tungsten carbide cutters are aggressive and long lasting
Tungsten carbide cutters are great for aggressive removal of concrete, asphalt and hard floor coatings
Tungsten carbide cutters can last up to 6,000 to 8,000 square feet when removing 1/8 inch per pass
Flat tip steel cutters are for concrete surface removal
Flat tip cutters are great for smaller areas when you have a top layer of concrete to remove
EDCO CPM-8, CPM-10 (6 Shaft) 6PT Carbide Cutter | 20156
DHS Equipment is your best online resource for affordable EDCO CPM-8 cutters, such as this 6 point tungsten carbide cutter for (6 shaft) machines. The dimensions of this cutter are 1-3/4" OD x 5/8" ID x 1/4" thick.
This is a genuine EDCO CPM-8 6 pt cutter factory replacement. EDCO part number 20156, CP206-T.
Scarifier Drum Setups for Cutter 20156
If you are a distributors for tool hire company/technical engineer/contractors for surface prep machines, we will be able to provide all kinds of tool replacement on your concrete milling scarifiers, floor grinding machines or floor planers for you. For any technical data or help, pls contact us right now and we will reply within 24 hours.
For more information about the dimensions, please kindly refer to below data to help you choose the most suitable cutter part for your scarifiers planers. And you can visite us at : www.scarifier-cutters.com for more information.